基于改进网格运动统计特征的图像匹配算法

为了解决尺度不变特征变换（SIFT）算法在图像匹配中匹配正确率低、耗时长等问题，提出一种基于改进网格运动统计特征RANSAC-GMS的图像匹配算法。首先，利用快速旋转不变性特征（ORB）算法对图像进行预匹配，对预匹配的特征点采用网格运动统计（GMS）来支持估计量以实现正确匹配点与错误匹配点的区分；然后，采用改进的随机抽样一致性（RANSAC）算法通过匹配点间的距离相似性对特征点进行筛选，并采用评价函数对筛选后的新数据集进行重新整理，进而实现对误匹配点的剔除。采用Oxford标准图库和现实中拍摄的图像对图像匹配算法进行测试对比，实验结果表明，所提算法在图像匹配中的平均匹配正确率达到91%以上；与GMS、SIFT、ORB等算法相比，该改进算法的近景匹配正确率和远景匹配正确率分别最少提高了16.15个百分点和3.56个百分点，说明它能有效剔除误匹配点，进一步提高图像匹配精度。     

基于组合双向拍卖的云资源调度方法

针对跨数据中心的资源调度问题，提出了一种基于组合双向拍卖（PCDA）的资源调度方案。首先，将云资源拍卖分为三个部分：云用户代理报价、云资源提供商要价、拍卖代理组织拍卖；其次，在定义用户的优先级及任务紧迫度的基础上，在拍卖过程中估算每一个工作发生的服务等级协议（SLA）违规并以此计算云提供商的收益，同时每轮竞拍允许成交多项交易；最终达到根据用户等级合理分配云资源调度的效果。仿真实验结果表明该算法保证了竞拍成功率，与传统一次拍卖成交一项的组合双向拍卖方案相比，PCDA在竞拍时间段产生的能耗降低了35.00%，拍卖云提供商的利润提高了约38.84%。     

基于GF-1数据的三峡库区水体信息精细化提取

为实现江河类狭长型水体信息的精细化提取，利用GF-1卫星数据，采用支持向量机和目视解译相结合的方法对三峡库区及重庆市水体信息进行了精细化提取。使用总体分类精度、Kappa系数、错分误差、漏分误差、制图精度和用户精度等指标对库区水体信息粗提取结果进行验证分析。结果表明:4个试验区水体提取的总体分类精度均超过90%，除试验区4的Kappa系数为0.884 1以外，其余试验区均超过0.9，提取精度较高。结合目视解译的方法，在粗提取结果的基础上对各问题进行精细化处理，得到精度高、完整性好的三峡库区以及重庆市水体信息数据，可为后续该区域的精细化遥感业务开展提供有效资料。     

基体稀释或基体匹配石墨炉原子吸收光谱法测定土壤样品中铅和镉

用石墨炉原子吸收光谱法测定土壤样品中Pb和Cd时,有时候直接按照方法标准GB/T 17141—1997操作,测定结果不能满足质控要求。研究结果表明,目标元素系列标准溶液中,分别含和不含土壤基体元素Na、Mg、Al、Si、Fe、Ca等元素混合成分时,校准曲线斜率明显不同。为减小基体效应的影响,基于文献调研和实验结果,对上述方法标准实验步骤进行了下列改进:(1)取相同体积实际样品消解液混合后,定量加入到用于建立校准曲线的系列标准溶液中,用于基体匹配;(2)对消解液进行适度稀释,仍采用标准溶液建立校准曲线。用4个土壤标样和土壤样品加标测定结果对改进后的方法进行了验证,结果表明,基体稀释法测定Pb的回收率范围分别为90.4%~114%;测定低含量Cd时,回收率范围为84.1%~125%。基体匹配法测定Pb和Cd的回收率范围分别为93.0%~105%和102%~119%,基本满足土壤样品中重金属回收率为80%~120%的质控要求。样品中痕量镉在测定下限附近时,应严格控制稀释倍数,或采用基体匹配法测定。改进后的操作步骤适合日常检测工作中大批量土壤样品中Pb和Cd的准确测定。     

基于多尺度结构特征的快速异源图像匹配

针对异源图像提出一种基于多尺度密集结构特征的快速匹配算法。算法首先利用Gabor滤波器逐像素提取图像中的结构响应,再根据主方向响应对多尺度结构特征融合,然后使用快速傅里叶变换在频域计算各特征分量图像之间的卷积,最后将卷积生成的系数矩阵求和计算出图像之间的相似性并选择相似性最大位置作为匹配结果输出。本文算法能有效适应异源图像间的非线性灰度变化和噪声干扰问题。测试使用可见光、红外、雷达图像组成的异源图像数据集对本文算法和现有算法进行测试比较,结果表明:本文算法的平均误匹配率最低,并且计算速度有明显优势。     

ZerNet: Convolutional Neural Networks on Arbitrary Surfaces Via Zernike Local Tangent Space Estimation

In this paper, we propose a novel formulation extending convolutional neural networks (CNN) to arbitrary two-dimensional manifolds using orthogonal basis functions called Zernike polynomials. In many areas, geometric features play a key role in understanding scientific trends and phenomena, where accurate numerical quantification of geometric features is critical. Recently, CNNs have demonstrated a substantial improvement in extracting and codifying geometric features. However, the progress is mostly centred around computer vision and its applications where an inherent grid-like data representation is naturally present. In contrast, many geometry processing problems deal with curved surfaces and the application of CNNs is not trivial due to the lack of canonical grid-like representation, the absence of globally consistent orientation and the incompatible local discretizations. In this paper, we show that the Zernike polynomials allow rigourous yet practical mathematical generalization of CNNs to arbitrary surfaces. We prove that the convolution of two functions can be represented as a simple dot product between Zernike coefficients and the rotation of a convolution kernel is essentially a set of 2 × 2 rotation matrices applied to the coefficients. The key contribution of this work is in such a computationally efficient but rigorous generalization of the major CNN building blocks.     

Two‐sided matching framework for optimal user association in 5G multi‐RAT UDNs

Recently, academic and industrial research communities are paying more explicit attention to the 5G multiple radio access technology ultra‐dense networks (5G multi‐RAT UDNs) for boosting network capacity, especially in UD urban zones. To this aim, in this paper, we intend to tackle the user association problem in 5G multi‐RAT UDNs. By considering the decoupled uplink/downlink access (DUDA), we divide our user association problem into two distinct subproblems representing, respectively, the uplink and the downlink channels. Next, we formulated each one as a nonlinear optimization problem with binary variables. Then, to solve them, we were restricted by the hard complexity, as well as the hard feasibility of centralized user association schemes. Thus, to resolve our user association problem in a reasonable time and distributed manner, we formulated each subproblem as a many‐to‐one matching game based on matching theory. Next, we provide two fully distributed association algorithms to compute the uplink and downlink stable matching among user equipments (UEs) and base stations (BSs). Simulation results corroborate our theoretical model and show the effectiveness and improvement of our achieved results in terms of the overall network performance, quality of service (QoS), and energy efficiency (EE) of UEs.     

A two-stage vision-based method for measuring the key parameters of ball screws

Ball screws are crucial for improving the reliability and interchangeability of transmission mechanical systems; however, existing contact measurement methods that utilise stylus contact are not efficient, which precludes their use for rapid in-situ geometry evaluation. This paper presents a vision-based two-stage method for rapid measurement of key parameters (raceway arc radii and centre distance) of ball screws. The edge contour information is extracted from the acquired image using the dual-tree complex wavelet transform and non-maximal suppression. In the matching stage, a shape-matching algorithm is used for detecting approximate geometrical centres of raceway arcs. The refinement stage, on the other hand, is implemented for acquiring precise dimensional results. Furthermore, the method of averaging multiple measurements is performed to suppress random noise. A comparative experiment is presented to validate the robustness of the proposed method. Based on experimental results, the calculated mean absolute errors in the measurement of the two raceway arc radii and the centre distance are found to be 0.0082 mm, 0.0079 mm and 0.0055 mm, respectively. This study therefore paves the way for key parameter measurement without removing ball screws.     

Oil Demand and Stocks

Current data of world oil demand. This includes international bunkers and refinery fuel. Updated on a monthly basis. Current data of oil demand from counties such as Canada, the United States of America, Japan, OECD Europe, Belgium, France, Germany, Italy, Netherlands, Spain, Sweden, the United Kingdom, Australia, Mexico, Republic of Korea, and Turkey. Updated on a monthly basis. Current data for crude oil and refined product stocks in Canada, Chile, Mexico, the United States (Western Hemisphere), France, Germany, Italy, Netherlands, Spain, the United Kingdom and Other Europe (Europe), Japan, Republic of Korea, Other Pacific (Asia-Pacific), and Total OECD (Table 12.1) Current data for refined product stocks in the OECD Western Hemisphere, OECD Europe, OECD Asia-Pacific and Total OECD. Products include gasoline, diesel and gasoil, and heavy fuel oil. Updated on a monthly basis (Table 12.2).     

冷却塔内气流流场特性研究及应用

冷却塔是火力发电厂循环水系统的重要设备,冷却塔的冷却效率对机组的微增功率有着比较重要的影响,冷却效率的提高有助于节约发电能耗。冷却塔的效率与其空气动力特性有着紧密的联系,本文以华电集团江苏分公司望亭发电有限公司3号机冷却塔的节能改造为例,研究了冷却塔内气流流场的特性,并阐述了针对该特性采取的技术措施在冷却塔优化改造中的应用实践。